What is the Difference Between Drilling and Boring?

What is the Difference Between Drilling and Boring?

Congratulations on entering the exciting world of boring! You might feel conscious of your lack of experience but you do not have to worry about anything. All frequently asked questions will be answered today.

Look through my expert drill press review. Although written by experienced professional users it has a simple language and is meant to be understood and followed by rookies and beginners.

Drilling

Drilling is a process meant to make cavities in solid surfaces. You can drill materials like concrete, metal, wood, brick, etc. Drilling vs boring is an initial step to creating the hole you need.

The drilling machines can either be manual or electric. The latter ones becoming more and more common, affordable and advanced and the first ones becoming more and more obsolete every day. Manual drills can only be used on wooden panels.

You can do center, spot or deep hole drilling. When working remember about the following. If you work with denser surfaces like metal or concrete your drill will overheat a bit, so remember to pull it out from time to time. Wood and metal surfaces require higher speed while bricks require lower speed.

Boring

The operation is meant to deepen and widen the drilled cavity. Boring vs drilling is a second step in creating the hole of the required dimensions. Both processes are necessary in order to achieve the perfect size, depth, and fit.

It is practically impossible to complete the job just by drilling. No matter if you have a through a hole and need to make a line boring. Or if you need to deepen a blind hole and have to perform back boring.

Longer cutting edges give you rougher boring. Use boring tips with three cutting edges if you need the job to go as fast as possible. Depending on whether you have a blind or a thorough hole make sure to look after the proper chip breaking and immediate purification.

Remember to use a bore with a dampening mechanism. This way you will have a proper dynamic rigidity. The longer the chips are the more they collect in the hole jamming it thus blocking and breaking the insert. Now you understand the ground rules and the difference between drilling and boring.

Insider Secrets

Remember to follow these simple steps:

  • Your working area should be neatly organized. Get rid of all the clatter.
  • Prepare a tool tray with all the necessary bits. Do it for every operation.
  • Make a step-by-step guide for every project.
  • Do not get down to boring or drilling if you feel tired or agitated.